Easy Nway to Clean Nestle Water Cooler
If you have a water cooler/dispenser, you'll want to clean it regularly. The U.S. Department of Energy recommends cleaning the cooler with every change of the bottle, or every six weeks, whichever arrives first. Keeping the water clean is the most important part of maintaining your cooler. Fortunately, washing your dispenser requires only some time, water, and either bleach or vinegar.[1]
-
1
Pour one gallon of water into a bucket. This step is the same whether you're using a bleach or a vinegar solution. Consider a bucket with a handle, or one that is easy to manage. It's best if none of the bleach solution spills out of the container and onto the floor, or your clothes.
-
2
Make the bleach solution. Add 1 tablespoon of bleach to every gallon of water that you choose to use. If possible, use an unscented bleach, as it'll be easier to flush the smell out towards the end.
- Mix the solution gently. Use disposable gloves if available (a recommended precaution, but not necessary). Be sure to do this in a space where you can afford to spill some, such as in a large sink.[2]
-
3
Make the vinegar solution. [3] For the mixture, you'll need only undiluted vinegar and a bucket. To ease the scent of the vinegar, you can choose to add a tablespoon or two of lemon juice. Mix in one part white vinegar for every three parts water. So if using a gallon of water, use 1/3 of a gallon (5 1/3 cups) of white vinegar. If including the lemon juice, add it after mixing the water and vinegar.
- As a word of caution, using vinegar is only about 80-90 percent as effective as using chlorine bleach to disinfect anything. While bottled water contains a very small amount of bacteria, it's possible for this amount to grow over time if not sanitized totally.[4]
-
1
Unplug the water cooler from the wall, and remove the bottle. Make sure there's no other electronics plugged into the same outlet, or near the area where you've chosen to clean your water cooler. This avoids any possibility, however small, of water meeting live electricity.
-
2
Wet a sponge to clean the inner surface of the water cooler with the cleaning solution. Let it stand for 2-5 minutes (but no more to avoid wear and tear), then drain the solution through the tap (the cool temperature one if there are two) and into a separate container. Drain this container down a sink or toilet.
-
3
Rinse out the remaining cleaning solution. Fill the inner reservoir with water four times and pour it out through the (cooler temperature) tap and into a bucket. Be thorough in this to make sure no bleach or vinegar taste is left behind.[5]
-
4
Lift off the drip tray and scrub well. Wash both the tray and the screen (if present) and rinse both in clean tap water before returning them to the dispenser. Be sure to dry thoroughly so as not to leave moisture in any tight spaces.
-
5
Wash your hands well, and dry the new bottle with a towel. Be sure to wash your hands before manipulating the bottle again.
-
6
Remove the cap and place the new bottle. Ensure a snug fit, and watch for air bubbles rising to the top of the bottle, indicating the bottle has made a seal with the dispenser.
-
7
Check that it works. Fill a glass of water, try both faucets if your dispenser has them. Taste the water to make sure no unpleasant taste has been left behind.[6]
Add New Question
-
Question
Will it be safe if there was black mold in the drain?
Black mold is a toxic mold. It can grow in houses and is extremely dangerous to humans. If you find any type of mold, you should not drink the water until you are 100% sure the water does not have any type of mold in it and have had the water tested.
-
Question
How do I remove a cap that is stuck in the water cooler?
If it's the little cap/plug that the piercing spike punches when you load in a bottle, the little cap floats to the top of the jug. It can't come out because it's larger than the hole. You do not need to worry about it.
-
Question
Will cleaning the dispenser help the water taste better?
Definitely. If it doesn't, then you may have missed some grime. Do your best to get to all of the crevices for a fresh taste.
-
Question
Do I use white or apple cider vinegar to clean my dispenser?
Apple cider vinegar is more expensive. You can buy white vinegar by the gallon at a supermarket. Sometimes it is in the section of the store with other cleaning products.
-
Question
I cleaned my water dispenser with vinegar and I still taste it in the water. How can I get the taste out?
Filling one of the jugs completely with water and then using that to drain through each spigot should help to clean out any unwanted taste. If there are multiple spigots, then drain half through cold, half through hot. If the problem persists, then maintenance in the hose system or replacement is suggested.
-
Question
What do I do if the cold water side has stopped working?
Take the cold water side apart as much as you can and clean out the line and screen on the cold water spigot.
-
Question
Where do I get lemon juice and vinegar?
Vinegar is commonly sold by the gallon at supermarkets. Lemon juice may be sold in pre-squeezed form as well, but in smaller quantities. Or, you can squeeze real lemons and use that juice.
-
Question
What do I do if the hot water stops coming out hot?
It could be that all the hot water is gone from the hot water heater if using a lot of hot water for a long period of time. Then is only a matter of waiting for the water heater to heat more water. Otherwise if your comfortable doing electrical / plumbing work look for information on troubleshooting your type of hot water heater or contact a professional. There may already be an article on that with things such as: Check circuit breaker, if tripping when reset could be wiring, short circuit, blown hot water heater element, might need to contact a professional or if comfortable doing electrical work, shut off power, test wiring and water heater elements, etc. check manual for your heater if needed.
-
Question
What do I do if my water dispenser is leaking water from underneath?
I suggest you unplug the dispenser immediately, remove the bottle, drain the dispenser until there is no running water left, and call a professional to check out the dispenser for you. Do not try to do it yourself, you might make the situation worse.
-
Question
How often does a water dispenser need to be cleaned if it is for commercial use?
It is recommended that the unit be cleaned every time you change the water.
Show more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Video
-
If need be, you can replace the bleach or vinegar with an appropriately anti-bacterial detergent. The right soap will sanitize better than vinegar. Consider rinsing more than with these to clean out any soap residue.
-
Do your best never to touch the spigots themselves, to avoid contamination of another person's drinking water.
-
Don't keep water more than 30 days. Like other foodstuffs, bottled water contains bacteria, however few, which can become a problem over long periods of time.
About this article
Article Summary X
To clean a water dispenser, unplug the cooler from the wall and remove the bottle. Use a sponge to wipe down the top of the water cooler. Then, mix 1 tablespoon of bleach into a gallon of water, and fill the inner reservoir of the cooler to the top with this mixture. Let it stand for 2-5 minutes before rinsing the water through the "cool" tap. Fill and rinse the reservoir 4 times with plain water to flush out the cleaning mixture. Clean the drip tray and replace the water bottle to finish cleaning the dispenser.
Did this summary help you?
Thanks to all authors for creating a page that has been read 488,629 times.
Did this article help you?
Source: https://www.wikihow.life/Clean-a-Water-Dispenser
0 Response to "Easy Nway to Clean Nestle Water Cooler"
Post a Comment